 |
Tiki-On-A-Budget |
meega
Tiki Centralite
Joined: Aug 19, 2007
Posts: 40
From: Pewaukee WI.
|  Posted: 2011-10-15 09:28 am Permalink
Curiosity got the best of me, and for less that $10 I ordered one of these mask kits. If you are looking for an impressive wall-hanging - this isn't for you. That said if you are looking for some craft ideas this isn't that bad. The down-side is that the finished piece is only about 4-1/2" tall. It looks like it could be a nice little addition to your collection, but unless your walls are bare......not a standout.
It's pro-side is that can give you some ideas as to how to do your own designs. This kit is made from balsa wood, some jute cord for trim, white glue(Elmer's), and a few pieces colored chalk. Although wood would be the best, I could see similar results with cardboard, Foam-core, etc. There are other ideas like this in this thread that are worth checking out as well.
|
danlovestikis
Grand Member (8 years) 
Joined: Jun 17, 2002
Posts: 6828 | Posted: 2011-10-15 09:39 am Permalink
Fun thread, we looked at every page. The fan you show has a Marquesas macrame bead on the handle. We have a bunch of those and that's the best use we have seen. Framing cards of events works well too. Good ideas, thank you, Wendy
_________________
|
VampiressRN
Grand Member (8 years)
Joined: Nov 23, 2006
Posts: 6141
From: Sun City Lincoln Hills (NorCal)
| Posted: 2012-07-01 4:43 pm Permalink
Time for summer projects. I'm going to use that leopard print fabric idea on my old lava lamp. Share Share Share
_________________
 "Oh waiter, another cocktail please!!!"
|
Fugu
Tiki Socialite
Joined: Feb 06, 2006
Posts: 157
From: Atlanta, Georgia
| Posted: 2012-07-24 12:05 pm Permalink
New Guinea Style Coconut Mask for under $10:
Materials:
- 1 Coconut cut in half and painted
- 1 Woven leather belt from the thrift store for the nose
- Raffia from the craft store for fringe
|
MadDogMike
Grand Member (8 years)
Joined: Mar 30, 2008
Posts: 8550
From: The Anvil of the Sun
| Posted: 2012-07-24 1:48 pm Permalink
Very cool idea Fugu, I'm gonna make me one of those. Thanks!
|
MadDogMike
Grand Member (8 years)
Joined: Mar 30, 2008
Posts: 8550
From: The Anvil of the Sun
| Posted: 2012-08-06 9:04 pm Permalink
Rum Bottle Tiki Torches
Quick, simple, and cheap (about $5) - my kinda project. I used a Kraken rum bottle that I netted. The first 2 pictures are missing the copper coupling that holds the wick
My Lowe's had the split ring (bottle holder) in copper but only had the mounting flange in iron, so I spray painted it hammered vintage copper. If you could find both parts in copper, you could cover the threaded rod in a short piece of copper pipe ~ it would all weather to a nice patina.
_________________
Gellhorn - "There's a lot of rum in this rum"
Hemingway - "In this joint they don't drink to get drunk, they drink to stay drunk"
|
Fugu
Tiki Socialite
Joined: Feb 06, 2006
Posts: 157
From: Atlanta, Georgia
| Posted: 2012-08-07 4:44 pm Permalink
Love the Kraken lantern! Very cool idea.
|
Atomic Tiki Punk
Tiki Socialite
Joined: Jul 19, 2009
Posts: 7048
From: Costa Misery
| Posted: 2012-08-07 5:29 pm Permalink
Mike, let me know if you need help in the future making more of those Kraken Lamps
I can help you prep (empty) them for mounting?
|
Hale Tiki
Tiki Socialite
Joined: Oct 19, 2004
Posts: 1799
From: Pittsburgh
| Posted: 2012-09-27 12:17 pm Permalink
I'm really digging this thread.
When I get to work full force on the bar, I'll have quite a bit to contribute! Thanks for what all I've seen so far.
|
MadDogMike
Grand Member (8 years)
Joined: Mar 30, 2008
Posts: 8550
From: The Anvil of the Sun
| Posted: 2013-09-01 2:11 pm Permalink
Seating is important for an outdoor tiki area. Plastic/resin patio furniture is readily available, inexpensive, durable, comfortable, and BORING!!!!
Anyone ever try to spice it up somehow? Like some sort of apply and wipe off finish that would give a woodgrain effect or some other sort of texturing looks? Seems the "Fusion" type spray paint for plastic would dry too fast but maybe wiping it with a coarse rag and paint thinner might work? I wonder if wood stain would penetrate enough to be permanent.
If you have any advice, please post IMMEDIATELY! I just bought new furniture and I'm headed outside NOW to experiment with the old stuff 
_________________
Gellhorn - "There's a lot of rum in this rum"
Hemingway - "In this joint they don't drink to get drunk, they drink to stay drunk"
|
Bruddah Bear
Tiki Socialite
Joined: Apr 07, 2011
Posts: 629
From: Los Angeles Basin, Westside
| Posted: 2013-09-01 3:12 pm Permalink
Mike,
I would experiment with a wood tone base coat then brush on a wood grain pattern, like furniture refinishers do sometimes. The question is which would work better, a light base coat and dark highlights, or dark base coat and light highlights? Dry-brush or wet-brush technique?
The biggest problem I imagine would be getting a paint to actually adhere to the plastic chair and not eventually flake off.
I'm thinking if anyone can come up with a solution, it's you. You're so crafty. 
|
Limbo Lizard
Tiki Socialite
Joined: Aug 24, 2006
Posts: 775
From: Aboard the 'Leaky Tiki', Dallas
| Posted: 2013-09-01 5:10 pm Permalink
And, Mike, before you invite your guest to have a seat in your spiffy new faux-wood stained plastic patio set, you might ought to sit in them, yourself, in some old white pants and shirt. Just sayin'...
_________________
"The rum's the thing..."
|
MadDogMike
Grand Member (8 years)
Joined: Mar 30, 2008
Posts: 8550
From: The Anvil of the Sun
| Posted: 2013-09-02 08:46 am Permalink
Bear, thanks for the encouragement
Limbo, good point!
Not sure I can call this a success yet but I'll keep working on it, right now it just looks dirty . Chairs are cheap ($11) so I bought an extra to play with. I knew getting paint to stick to plastic would be difficult so I got Krylon Fusion spray which is supposed to be formulated for plastic, I started with a tan chair. I tried a few methods;
1 - Spray on a light to medium coat the wipe it with a cloth and turpentine. Not so great, especially on the smooth untextured areas of the chair
2 - Dip the brush in turpentine, wipe off the excess then spray THE BRUSH with paint and brush on the chair. Worked fair
3 - Spray on a light coat and brush with turpentine. That worked fair too. Maybe a combination of all three will give a decent effect?
Krylon recently introduced Fusion brush on paint for plastic, maybe I could thin it and brush it on. I'll need to see if I can find it in my area.
In the meantine, I will touch this chair up a bit, let it dry and use it for a month or two to see what happens.
_________________
Gellhorn - "There's a lot of rum in this rum"
Hemingway - "In this joint they don't drink to get drunk, they drink to stay drunk"
|
The Granite Tiki
Tiki Socialite
Joined: Jul 02, 2005
Posts: 817
From: Nashua, NH
| Posted: 2013-09-02 10:41 am Permalink
It looks better. Maybe do the fake lattice portion in a lighter khaki to make it look like real rattan thatch on a darker chair.
|
MadDogMike
Grand Member (8 years)
Joined: Mar 30, 2008
Posts: 8550
From: The Anvil of the Sun
| Posted: 2013-09-02 4:25 pm Permalink
I have taken an ubiquitous $11 plastic chair and turned it into a work of art! Well, maybe not
I started with a fresh chair and used wood stain this time. 1 part Minwax walnut wood stain to 4 parts paint thinner (turpentine) and dry brushed it on. Once it dries I'll see if it actually penetrated to plastic or if it rubs off
_________________
Gellhorn - "There's a lot of rum in this rum"
Hemingway - "In this joint they don't drink to get drunk, they drink to stay drunk"
|
