FEATURES | MUSIC | BOOKS | DRINKS | FORUMS | GAMES | LINKS | ABOUT


advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums Creating Tiki Tiki Carving faux bamboo tech. here
faux bamboo tech. here
theartcoach
Tiki Centralite

Joined: Apr 25, 2005
Posts: 69
Posted: 2005-05-03 10:04 am   Permalink

I found a couple of goo dlooking Faux Bamboo ideas one here:
http://www.suite101.com/article.cfm/10645/60395
and here:
http://www.diynetwork.com/diy/cr_faux_finishes/article/0,2025,DIY_13754_2270782,00.html

[ This Message was edited by: on 2005-05-03 10:15 ]


 View Profile of theartcoach Send a personal message to theartcoach  Email theartcoach     Edit/Delete This Post Reply with quote
sungod
Tiki Socialite

Joined: Feb 07, 2003
Posts: 219
From: Tampa Bay/New Port Richey
Posted: 2005-05-03 3:10 pm   Permalink

Thanks for the links. Will come in handy.

 
View Profile of sungod Send a personal message to sungod  Email sungod Goto the website of sungod     Edit/Delete This Post Reply with quote
WillTiki
Tiki Centralite

Joined: Apr 29, 2004
Posts: 56
Posted: 2005-05-04 08:07 am   Permalink

I have a didgeredoo (Australian Aboriginal musical instrument)made from PVC pipe that was made to look like bamboo. The joints and bends were made by heating a small area of the pipe with an heat gun (if you are not familiar with these, its kind of like an industrial strength blow-dryer capable of setting hair paper etc. on fire) and either bending for bends (duh) or slightly stretching and then pushing back together for joints. While it is still a little soft, a putty knife or similar tool can be applied circumfrencially to make the goove in the joint. Lonitudinal grooves are made by heating and applying a tool. This is definitely out-door work due to the fumes and danger of fire. Wear gloves and shoes and go easy with the heat until you get a feel for the working range for heating the pipe. Too little heat and it is cooled before you can bend it and too much and it just sags. It helps to work on a reasonably large flat surface that you can use to hold the pipe while you heat and turn it to make joints. The order generally is joints first, then bends last so it can still roll on a flat surface while being heated for the joints.
Finish with primer and longitudinally apllie streaky wood finish. This was for a musical instrument not a structural application; I used the thinner walled PVC; the thicker would be harder to heat but stronger. Also, I am not sure how much it weakens the pvc to heat bend and stretch it but rest assured it will weaken it. Remember, if you still want to join the ends using pipe joints etc to keep the heat away from them or you will distort them to the point that they will no longer fit.


 
View Profile of WillTiki Send a personal message to WillTiki      Edit/Delete This Post Reply with quote
Tikiwahine
Tiki Socialite

Joined: Apr 09, 2003
Posts: 3288
From: Ontario, Canada
Posted: 2005-05-04 3:30 pm   Permalink

WillTiki, I'd love to see a pic of this PVC wonder!

 
View Profile of Tikiwahine Send a personal message to Tikiwahine      Edit/Delete This Post Reply with quote
U-Moderate:
  
v1.5

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2014 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation