FEATURES | MUSIC | BOOKS | DRINKS | FORUMS | GAMES | LINKS | ABOUT


advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums Creating Tiki Tiki Carving Hewey's wood thread - Making a Paipo p20

You are viewing a single post from the search result.
view the entire topic
Goto page ( 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 Next Page )
Hewey's wood thread - Making a Paipo p20
hewey
Tiki Socialite

Joined: Sep 14, 2004
Posts: 4283
From: Sydney, Australia
Posted: 2010-03-05 9:01 pm   Permalink

I wasnt happy with the shape of the fish tail rear end so I lopped it off, so it now looks more like a traditional Alaia. I then rounded off the edges a bit, and gave the rails some shape too (although not much, given it wont be a rider so its not critical).



Once I'd done that, I decided to wack the bejesus out of it, just for kicks. As luck would have it, a hammer and a tyre iron were close at hand


_________________
www.kustomkultureaustralia.com

 View Profile of hewey Send a personal message to hewey  Email hewey     Edit/Delete This Post Reply with quote
Goto page ( 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 Next Page )
U-Moderate:
  
v1.5

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2017 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation