advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums Creating Tiki Tiki Carving Safety Thread...Read pg. 3

You are viewing a single post from the search result.
view the entire topic
Goto page ( 1 | 2 | 3 | 4 | 5 | 6 | 7 Next Page )
Safety Thread...Read pg. 3
Matt Reese
Tiki Socialite

Joined: May 09, 2005
Posts: 1182
From: San Diego
Posted: 2006-08-28 8:37 pm   Permalink

Another point of interest may be what to do in specific situations. I follow the MSDS sheets for all the chemicals at my job. The basic deal working with chemicals such as stains or adhesives is pretty much the same.
1. If a chemical gets in your eyes - flush with lots of water for at least 15 minutes. If irritation persists get medical attention.
2. If it gets on your skin - wash with a gentle soap and water.
3. If it is an inhalation issue - Remove to fresh air, give artificial respiration if needed seek medical assistance.
4. This one is a little different depending on the chemical but
If ingested - drink one to two glasses of water or milk. DO NOT induce vomiting seek medical attention. Never give anything by mouth to an unconscious person.(best to check labels for first aid on the specific stains or whatever being used.)

I know a lot of this is common sense but common sense can vanish real quick in a panic type situation.
Great thread.

View Profile of Matt Reese Send a personal message to Matt Reese  Email Matt Reese     Edit/Delete This Post Reply with quote
Goto page ( 1 | 2 | 3 | 4 | 5 | 6 | 7 Next Page )

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2018 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation