FEATURES | MUSIC | BOOKS | DRINKS | FORUMS | GAMES | LINKS | ABOUT


advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums Creating Tiki Tiki Carving How to split a log?
How to split a log?
Chairman Kaga
Member

Joined: Sep 15, 2004
Posts: 10
From: Saint Petersburg, FL
Posted: 2006-05-01 6:22 pm   Permalink

I did a search but I did not find a topic about this.

I have been considering slicing a log in half along the length to end up with two log length pieces with a flat side on the reverse. I figured after carving the tiki on the round side I could scoop out some of the core (to reduce weight) leaving a piece that has a crescent moon profile. The goal is to have something that could be hung up on a wall. Has anyone done something similar to this before? If so any advice on splitting or cutting the log in such a way to achieve a centered cut? If I was more experienced with a chainsaw I could wing it but I fear I may end up with an angled cut or two uneven pieces. If I had a saw mill or knew Snidley Whiplash this would be much simpler.


 
View Profile of Chairman Kaga Send a personal message to Chairman Kaga      Edit/Delete This Post Reply with quote
GMAN
Tiki Socialite

Joined: Jul 14, 2005
Posts: 2996
From: My Island
Posted: 2006-05-01 6:43 pm   Permalink

The saw is the way to go. I can help if you need it.

-Gman


 
View Profile of GMAN Send a personal message to GMAN      Edit/Delete This Post Reply with quote
U-Moderate:
  
v1.5

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2014 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation