FEATURES | MUSIC | BOOKS | DRINKS | FORUMS | GAMES | LINKS | ABOUT


advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums Creating Tiki Tiki Carving Seagoat's pieces *update 10/31/16- p.5

You are viewing a single post from the search result.
view the entire topic
Goto page ( 1 | 2 | 3 | 4 | 5 Next Page )
Seagoat's pieces *update 10/31/16- p.5
seagoat
Tiki Socialite

Joined: Dec 28, 2007
Posts: 229
From: Long Beach, CA
Posted: 2009-10-14 11:33 am   Permalink

Hey everyone, well another small update here. I had a random piece of driftwood that I ended up making into a wine bottle holder. This is a piece that I cut off in the process and held onto to do something with later.



To me, it looked kind of Moai, so I went with that and tried to bring it out. Here is one mid point photo;



Done carving, and after some sanding;



and with a finishing coat;



After looking at these head on photos I realized it is a little hard to see some of it so here is one with a bit of a bottom angle and one of a 3/4 profile.





So it's not much but a little something I decided to do with some scrap wood. Still need to get to the eucalyptus and swordfish bills someday.

Thanks for looking.


 
View Profile of seagoat Send a personal message to seagoat      Edit/Delete This Post Reply with quote
Goto page ( 1 | 2 | 3 | 4 | 5 Next Page )
U-Moderate:
  
v1.5

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2017 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation