advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums Creating Tiki Tiki Carving Grand Poobah's Oasis Update

You are viewing a single post from the search result.
view the entire topic
Goto page ( 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 Next Page )
Grand Poobah's Oasis Update
Grand Poobah
Tiki Socialite

Joined: Dec 09, 2008
Posts: 234
From: Reading, PA
Posted: 2012-02-05 1:54 pm   Permalink

Here are a few other things I finished up. One was fixing an old sign I made a few years ago. The wind blew the sign over. I didn't like it much so I thought I would try again. Here is the first sign.

so I made a new one

I liked it so I made another one. I even made sure the mileage is correct!

Finally I had to re-sand some earlier projects, re-stain , and re-coat. The fist couple of tikis I made were finished with a spray on polyurethane. I don't think this has held up to well. No I am going back and cleaning these guys up and brushing many coats on.

Thanks for looking. Got some work done on my Saddam table today. Just have to sand and stain. Once I am done I am back on tiki detail!

View Profile of Grand Poobah Send a personal message to Grand Poobah      Edit/Delete This Post Reply with quote
Goto page ( 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 Next Page )

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2018 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation