|
Paperclay and other abominations |
little lost tiki Tiki Socialite
Joined: Jun 12, 2006 Posts: 7750 From: Orange,CA-right near the Circle!
| Posted: 2009-05-13 08:00 am  Permalink
let's see the club,bub...
 
 
|
MadDogMike Grand Member (8 years)
Joined: Mar 30, 2008 Posts: 9020 From: The Anvil of the Sun
| Posted: 2009-05-13 08:10 am  Permalink
Here ya go LLT
I think it turned out a bit clunky and Neanderthal instead of gracefully Polynesian, looked like something GROG should carry
_________________

 
 
|
Babalu Tiki Socialite
Joined: Nov 19, 2006 Posts: 2511 From: Lemon Grove
| Posted: 2009-05-14 10:11 pm  Permalink
Very nice Mike. This is one of my favorites of yours.
 
 
|
Mr. Pupu Pants Tiki Socialite
Joined: Mar 06, 2008 Posts: 337 From: Edmonds, WA
| Posted: 2009-05-14 10:25 pm  Permalink
That is SUPERCOOL. I love the faux wood finish. Just awesome.
How much did the 25 lbs of paperclay cost?
 
 
|
MadDogMike Grand Member (8 years)
Joined: Mar 30, 2008 Posts: 9020 From: The Anvil of the Sun
| Posted: 2009-05-15 12:45 pm  Permalink
Mr 3P! The faux wood is marbled brown and white clay, the teeth are homemade paperclay. I think I paid about $15 for 25 lbs of the commercial stuff that I picked up this week, not too bad. Got a small project in mind for the paperclay, hope to try it out this weekend.
_________________

 
 
|
Iokona Ki'i Tiki Socialite
Joined: Nov 14, 2008 Posts: 816 From: SoCal
| Posted: 2009-05-15 12:54 pm  Permalink
Cool club ya got there Mike!
Can you tell the difference between the
clay club and the paper clay teeth?
_________________ Velvets by J. Sallin

 
 
|
MadDogMike Grand Member (8 years)
Joined: Mar 30, 2008 Posts: 9020 From: The Anvil of the Sun
| Posted: 2009-05-15 4:24 pm  Permalink
Jason, after the clay was glazed, there's no visible difference. I used the paperclay because it stronger when dried and unfired. I made the teeth and let them dry, then pushed them through the wet clay mug from the inside. Dried regular clay would be too brittle for that.
_________________

 
 
|
MadDogMike Grand Member (8 years)
Joined: Mar 30, 2008 Posts: 9020 From: The Anvil of the Sun
| Posted: 2009-05-20 7:07 pm  Permalink
I wanted to put paperclay "through the gauntlet" so to speak, I am made a ceramic gauntlet sword holder (sorry, it's not even remotely tiki). I think I have violated all of the potter's rules and maybe even some of the Geneva Conventions. It varies in thickness with about 1 inch being the thickest. Here are the laws I flaunted:
I added wet clay to dry clay
I force dried it in 48 hours (1 inch thick, from bag to kiln in 2 days!)
I transported it, unprotected, when bone dry
I glazed it unfired, combining the bisque and glaze firings (not the hand, another piece of paperclay) Glaze was glossy with no pits, craters, etc.
The only torture I didn’t try was putting partially dried clay in the kiln, maybe I’ll try that next.
This is Laguna WC953 "Max's Paperclay". It is a high fire clay but they say it can be low fired, I chose it over the other paperclays they had because it fires white. I wish I had the background and education to describe it's characteristics but I don't. So instead I'll compare and contrast it to the EM347 I usually use. The EM347 contains quite a bit of talc and feels silky, the paperclay has fine and coarse grog along with the paper fibers, it feels much grittier. I love the way the EM347 works when it's leatherhard, it carves beautifully into tiny chips and allows you to carve fine details. The paperclay's fibers grab and clog your tools, pulling away little bits of clay instead of carving cleanly. It also seems that the paperclay dries up faster while you're trying to work with it. In addition to paperclay's "rule breaking" abilities, it allegedly fires lighter. But I made 2 pedants as identical as I could, the paperclay ended up weighing about 3% more than the EM347.
So I guess, just like any project, you pick the material that best suits the job. If you want fine detail, paper clay is out. If you need a quick project, need a wet on dry technique, or need unfired strength then paperclay is great.
_________________

 
 
|
Iokona Ki'i Tiki Socialite
Joined: Nov 14, 2008 Posts: 816 From: SoCal
| Posted: 2009-05-21 11:47 am  Permalink
Wow, pretty cool info. I think I'm beginning
to understand paperclay a little. Just seemed like
an oxymoron before. Push that envelope Mike!
Cool sword holder!
_________________ Velvets by J. Sallin

 
 
|
little lost tiki Tiki Socialite
Joined: Jun 12, 2006 Posts: 7750 From: Orange,CA-right near the Circle!
| Posted: 2009-05-26 9:20 pm  Permalink
Dang ! That club did turn out killer!
the grains give it a weird eerie otherworldly cartoony feel..
SUCCESS!
and that awesome "iron" glove holder!
FUDGEEEEEEEE!
grab some buttah cause you are on a roll!
_________________
www.kinnyruzic.com Art Blogs Wishes Fulfilled!
I'm on Facebook and now Instagram under Ken Ruzic
AW Jeah!
 
 
|
MadDogMike Grand Member (8 years)
Joined: Mar 30, 2008 Posts: 9020 From: The Anvil of the Sun
| Posted: 2010-07-29 12:09 pm  Permalink
Anyone have experience with clay and "combustables" other than paper? I want some light and porous clay for a project so it's back to the MadDog Mike Tiki Laboratory. I started with Cone 04 casting slip and mixed a few batches using ground corn cobs (small animal bedding), ground spagetti, crushed crackers, & cereal flakes. Most of them are mixed 50/50 by volume. I wanted to try sawdust but haven't found any I like yet.
Any other suggestions? Needs to be something granular that will burn out in the kiln. Something cheap and readily available. Vermiculite? Pearlite? Couscous? Rice? Dry Tapioca?
 
 
|
beadtiki Tiki Socialite
Joined: Aug 24, 2007 Posts: 929 From: Bothell, Washington
| Posted: 2010-07-29 12:31 pm  Permalink
Those are some nasty-looking burgers you got there Mike! LOL
 
 
|
MadDogMike Grand Member (8 years)
Joined: Mar 30, 2008 Posts: 9020 From: The Anvil of the Sun
| Posted: 2010-08-03 09:41 am  Permalink
Quote:
|
On 2010-07-29 12:31, beadtiki wrote:
Those are some nasty-looking burgers you got there Mike! LOL
|
|
You shoulda seen them burgers smoke when I put them in the kiln
Well the results are in;
50% corn cob and 50% ground spaghetti both fell apart in the kiln
30% corn cob and 50% Honey Bunches of Oars were both too weak
50% crushed saltine crackers showed some promise - light, strong, and interesting texture.
Still want to try some sawdust and couscous for a little finer texture 
 
 
|
beadtiki Tiki Socialite
Joined: Aug 24, 2007 Posts: 929 From: Bothell, Washington
| Posted: 2010-08-03 10:32 am  Permalink
OMG! I've been eating the wrong cerial - Honey Bunches of OARS!?
 
 
|
little lost tiki Tiki Socialite
Joined: Jun 12, 2006 Posts: 7750 From: Orange,CA-right near the Circle!
| Posted: 2010-08-03 11:05 am  Permalink
mmmmmmmmmm
gray hamburgers!

 
 
|