FEATURES | MUSIC | BOOKS | DRINKS | FORUMS | GAMES | LINKS | ABOUT


advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums Creating Tiki Tiki Carving My First Mask Carving!
My First Mask Carving!
frizz
Member

Joined: Oct 07, 2009
Posts: 5
From: Sarasota, FL
Posted: 2010-11-20 09:51 am   Permalink

I thought I would share my first tiki carving! This is a mask I carved from a piece of yellow pine plank.



After adding a little stain...



Here is the mask mounted inside a frame. It's roughly 30" x 22" in size. My original idea was to add some tapa designs to the back board and then put strips of bamboo on the frame.



I later decided to put the strips of bamboo on the back board and carve some tapa designs into the frame.



Here is the finished carving as it hangs in my living room.





 
View Profile of frizz Send a personal message to frizz      Edit/Delete This Post Reply with quote
Kino
Tiki Centralite

Joined: Aug 16, 2009
Posts: 100
From: Valley of The Sun (Phoenix, AZ)
Posted: 2010-11-20 6:44 pm   Permalink

very nice first tiki, well done !

 
View Profile of Kino Send a personal message to Kino      Edit/Delete This Post Reply with quote
U-Moderate:
  
v1.5

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2014 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation