 |
SWIZ - Mugs 'n' Stuff....First new firing in a long time. |
swizzle
Tiki Socialite
Joined: Jun 03, 2007
Posts: 1152
From: Melbourne,Australia
|  Posted: 2011-02-09 04:29 am Permalink
OK. I've been wanting to make my own mugs for a while now and I finally enrolled in a part-time ceramics course to give me the kick up the bum I need. It's 2hrs once a week for 9 weeks so progress is going to be slow unless I start doing some work at home, which hopefully I will.
The teacher does slip casting herself so it looks like i'll be in good hands. Had my first night tonight and this where i'm up to so far.No name for him yet, I think i'll just call him #1.
 
Next week i'll be changing the eyes a bit as i'm not happy with them, they dont look the same as in my sketch. Then i'll do the mouth and fix the goatee and then shape and smooth it ready to dry out so I can make the mold.
_________________
[ This Message was edited by: swizzle 2012-03-15 23:51 ]
[ This Message was edited by: swizzle 2012-12-29 01:11 ]
[ This Message was edited by: swizzle 2012-12-29 01:11 ]
[ This Message was edited by: swizzle 2012-12-29 01:12 ]
[ This Message was edited by: swizzle 2013-04-08 04:45 ]
[ This Message was edited by: swizzle 2013-04-27 00:51 ]
[ This Message was edited by: swizzle 2013-08-21 03:40 ]
[ This Message was edited by: swizzle 2013-08-21 05:34 ]
[ This Message was edited by: swizzle 2013-10-23 03:24 ]
[ This Message was edited by: swizzle 2013-10-23 03:26 ]
[ This Message was edited by: swizzle 2014-02-01 00:19 ]
[ This Message was edited by: swizzle 2014-04-10 01:43 ]
[ This Message was edited by: swizzle 2014-08-23 03:01 ]
[ This Message was edited by: swizzle 2015-10-11 06:18 ]
[ This Message was edited by: swizzle 2015-10-21 18:33 ]
[ This Message was edited by: swizzle 2015-10-22 01:00 ]
[ This Message was edited by: swizzle 2015-10-22 01:01 ]
[ This Message was edited by: swizzle 2015-10-26 18:17 ]
[ This Message was edited by: swizzle 2015-10-30 18:09 ]
[ This Message was edited by: swizzle 2015-11-12 16:15 ]
[ This Message was edited by: swizzle 2015-11-19 17:31 ]
[ This Message was edited by: swizzle 2016-01-09 22:45 ]
[ This Message was edited by: swizzle 2016-01-30 00:01 ]
[ This Message was edited by: swizzle 2016-03-19 18:56 ]
[ This Message was edited by: swizzle 2016-04-11 19:10 ]
[ This Message was edited by: swizzle 2016-07-11 01:53 ]
|
zerostreet
Tiki Socialite
Joined: Feb 06, 2010
Posts: 2203
From: http://www.zerostreet.com
| Posted: 2011-02-09 04:41 am Permalink
Looks cool! Love the raised "eyebrow"!
[ This Message was edited by: zerostreet 2011-02-09 04:42 ]
|
MadDogMike
Grand Member (8 years) 
Joined: Mar 30, 2008
Posts: 8554
From: The Anvil of the Sun
| Posted: 2011-02-09 06:15 am Permalink
Love the name, so BOLD!!! 
You go Swizz!!! Have fun, you're off to a great start
|
Skipper
Tiki Centralite
Joined: Oct 26, 2010
Posts: 89
From: Denmark, Frederikshavn
| Posted: 2011-02-09 09:06 am Permalink
Looks very nice! Love the eyebrow does have a great effekt on the face.. real cool 
|
GROG
Grand Member (first year) 
Joined: Jun 21, 2006
Posts: 7125
From: Tujunga
| Posted: 2011-02-09 09:29 am Permalink
Well it's about f**kin' time! Every day GROG say to GROGself, "Why the hell hasn't Swizzle started making mugs?" Good start. Be careful of undercuts when making molds. It's hard to tell in the photo, but looks like you might have some undercuts under the nose. Good luck and good start.
|
danlovestikis
Grand Member (8 years)
Joined: Jun 17, 2002
Posts: 6829 | Posted: 2011-02-09 09:30 am Permalink
Swizzel, I'll be following your thread. I see a Carless Navigor mug in your future. Great start, I too love the raised eyebrow. Hugs, Wendy
|
Beachbumz
Grand Member (first year)
Joined: Jan 09, 2008
Posts: 1091
From: Kihei, Maui
| Posted: 2011-02-09 10:34 am Permalink
Looking awesome already Swizzle!
He's going to be great..
As Grog says, IT'S ABOUT TIME!! 
Have fun with it..
[ This Message was edited by: Beachbumz 2011-02-09 10:34 ]
|
Bowana
Tiki Socialite
Joined: Nov 10, 2006
Posts: 1180
From: La Mesa, CA
| Posted: 2011-02-14 7:35 pm Permalink
All right, Swizzle! Taking the plunge!
Art instructors are generally not too keen on Tiki. Not art to them (probably because it's something that can actually be sold)
What was the reaction from yours?
Bowie
_________________
That's my story and I'm sticking to it.
|
swizzle
Tiki Socialite
Joined: Jun 03, 2007
Posts: 1152
From: Melbourne,Australia
| Posted: 2011-02-14 9:20 pm Permalink
She seemed fine with it Dave. Being a short course for adults I dont think it's an issue with her. She was quite intrigued with my fascination with Tiki. And I think she respected me because I told her I knew the process involved and could do it on my own, I was just wanting someone to guide me through all the pitfalls I might come across.
P.S. Thanks to all above for your compliments. Thanks GROG also for the advice about undercuts. I am aware of that and will make sure I dont have any when I clean it up.
_________________
[ This Message was edited by: swizzle 2011-02-15 00:54 ]
|
swizzle
Tiki Socialite
Joined: Jun 03, 2007
Posts: 1152
From: Melbourne,Australia
| Posted: 2011-02-16 03:10 am Permalink
Here's the progress on my mug after my second class. Fixed the eyes, did the mouth and added teeth and fine tuned the nose. He's not as smooth as i'd like but i'm happy enough with him to start the mold next week. Any mug makers out there who can give me a tip on how to get a smooth finish on the tighter areas where I cant get my fingers in? I was using a soft paint brush dipped in water which worked OK but it's still not perfect. Or is it just a matter of using wooden tools and a steady hand?
 
|
danlovestikis
Grand Member (8 years)
Joined: Jun 17, 2002
Posts: 6829 | Posted: 2011-02-19 09:22 am Permalink
I wish I knew. I do a lot of sanding and carving on the cast once is it dried. On eBay they sell sets of dental tools that work well for detail. I hope someone has more advise I could use it too. Hugs, Wendy
_________________
|
hewey
Tiki Socialite
Joined: Sep 14, 2004
Posts: 4283
From: Sydney, Australia
| Posted: 2011-02-20 02:36 am Permalink
Looks good mate
|
swizzle
Tiki Socialite
Joined: Jun 03, 2007
Posts: 1152
From: Melbourne,Australia
| Posted: 2011-03-02 05:15 am Permalink
Started on my mold this week. I was hoping to do it last week but after looking at the master I ended up modifying it a bit as i'm only doing a three piece mold (with the spare) and it looked liked I might have some problems with it separating around the mouth so he's ended up more round than when I started.
My teachers method of doing the first pour of plaster is different to the posts i've seen by Wendy Cevola and other mug makers on this forum. Being shown this way does actually seem a little easier to me than what i've seen on this site. I'll be interested to see what others think of the method i'm/we are doing. I also like the way she has made the box. Each piece of wood has an L shaped bracket screwed to it which allows the other pieces to slot up nicely next to the other (you can just see it in the third photo). I plan on making one of my own this way which will be closer in size to a standard mug. The one we are using is quite large. She also recommended I get some bicycle tubes to hold the mold together when it comes to pouring.
Here he is inside the box. Instead of packing the base with clay and around the master it is just propped up on two blocks of clay and the plaster is poured in around him up to the separation line. The idea is to remove those clay blocks after all the pieces have been poured and then do another pour to fill the holes. (I took a photo but my camera was going flat so it didn't work, i'll try to remember to take one again next week).
Now as mentioned above instead of packing the base with clay to stop the plaster leaking out, we filled up the cracks on the outside of the box with clay to stop it from doing that. You can see how in these two photos. She also didn't measure the plaster as we were mixing, but instead went by feel (although she did say it's about 2/1 plaster/water). It was actually very thick when we poured it so that therefore made it more difficult for it to leak out of any gaps and also, as she said, makes the mold more dense and stronger.
 
Here it is after pouring the plaster in and then with the box removed and the guide markers added. The excess plaster on the master will be removed before the second half of the mold is poured, I didnt have time to do that tonight as the class was finishing up.
 
More pics next week.
_________________
[ This Message was edited by: swizzle 2011-03-02 05:20 ]
|
danlovestikis
Grand Member (8 years)
Joined: Jun 17, 2002
Posts: 6829 | Posted: 2011-03-02 08:08 am Permalink
Hi Swizzle, this is very different. I'm looking forward to seeing the rest of the steps. How much plaster is under the backside of the tiki master? Will at denser plaster still pull the same amount of water out of the slip? Wendy
_________________
[ This Message was edited by: danlovestikis 2011-03-02 08:08 ]
|
swizzle
Tiki Socialite
Joined: Jun 03, 2007
Posts: 1152
From: Melbourne,Australia
| Posted: 2011-03-02 1:10 pm Permalink
Hi Wendy,
There's about 1" - 1 1/2" of plaster below the master. I'm not sure if the denser plaster will make any difference to how much water gets sucked out. I'll have to find out next week.
|
