FEATURES | MUSIC | BOOKS | DRINKS | FORUMS | GAMES | LINKS | ABOUT


advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums » » Creating Tiki » » Other Crafts » » News and Troubles of Jürka's Tiki Factory

You are viewing a single post from the search result.
view the entire topic
Goto page ( 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 Next Page )
News and Troubles of Jürka's Tiki Factory
Jürka
Tiki Centralite

Joined: Aug 15, 2012
Posts: 79
From: Estland
Posted: 2012-08-17 2:15 pm   Permalink

3-piece mold may be pretty good idea, but it means that one of the most important places must be cleaned after slip casting... I would not like to have connection on the front part... I guess I'll try to find some ceramic plaster at Monday and hope it will work better... and use a lot of soap... But meanwhile... Today I glued together next four pieces of wood and try to start carving Lono for the next mug after if it happens to happen that one day Kumuhonua comes alive...

 
View Profile of Jürka Send a personal message to Jürka  Email Jürka     Edit/Delete This Post Reply with quote
Goto page ( 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 Next Page )
U-Moderate:
  
v1.5

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2017 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation