|
Burning Help Needed |
Hale Tiki Tiki Socialite
Joined: Oct 19, 2004 Posts: 1799 From: Pittsburgh
| Posted: 2012-10-03 09:50 am  Permalink
So, I've begun construction on The Aku Aku Room, officially. I've started with the trim. Some of you may see where I got my inspiration from. And by inspiration, I mean an exact copy. Great artists steal, right? Anyway, it's my first attempt at routing trim. It's been a long time, and as The Aku Aku room progresses, I'll venture off into my own designs, but for now, I've decided to pay homeage to Bosko by turning his 8' pole pattern into 4" trim around the top of the room. There's a seam at 8ft, and I need something good to cover it up.
Now to my question. This is the first time I've done any burning, and it's not coming out properly. That is to say, the routed parts are still white. Am I just not burning things long enough? I'm being gentle with it, and just getting it to a nice patina, as you can see in the photos. I've got some small areas that I let burn longer that started to catch, and immediately blew out. I'm hoping Ben or some of you other experts out there will lend some advice. Oh, and since Redwood is damn near impossible to get locally, it's pine.
Mahalo.

 
 
|
Atomic Tiki Punk Tiki Socialite
Joined: Jul 19, 2009 Posts: 7048 From: Costa Misery
| Posted: 2012-10-03 10:33 am  Permalink
What kind of torch are you using, the wood is untreated right & you have not applied
any thing to the wood yet?
I use a hand torch, I get them at my local Ace or Home Depot for under $20
and a hard wire brush, like the type used to clean a BBQ grill for removing light coats of ash
you should be able to get the routed areas charred the way you want.
You are doing multiple passes of burning, then a light scrapping to get the right look?
 
 
|
Will carve Tiki Socialite
Joined: Apr 06, 2011 Posts: 941 From: Ft. Lauderdale Fl.
| Posted: 2012-10-03 10:35 am  Permalink
You could try a polyurethane coat.
Then a dark glaze that you wipe or brush on,
Then wipe off where you don't want it.
Could call it aging or antiquing.
 
 
|
Hale Tiki Tiki Socialite
Joined: Oct 19, 2004 Posts: 1799 From: Pittsburgh
| Posted: 2012-10-03 10:42 am  Permalink
Thanks Will, going for burnt though.
ATP: Mapp Gas. Hand torch. Stainless steel brush. Should I be brushing immediately after burning?
 
 
|
AlohaStation Tiki Socialite
Joined: Sep 27, 2004 Posts: 2392 From: So FL
| Posted: 2012-10-03 10:49 am  Permalink
Experiment on a scrap piece of wood first. Do you want it burnt for the smell? or for the texture? Paint and stain can be use in combination with the flame. If done right you should not be able to tell the difference. I suggest stain/painting first and then burn and brush.
 
 
|
Hale Tiki Tiki Socialite
Joined: Oct 19, 2004 Posts: 1799 From: Pittsburgh
| Posted: 2012-10-03 10:53 am  Permalink
Texture/color.
Think Bosko carvings.
I've never stained then burned. Hmmmmm.
 
 
|
Atomic Tiki Punk Tiki Socialite
Joined: Jul 19, 2009 Posts: 7048 From: Costa Misery
| Posted: 2012-10-03 11:27 am  Permalink
Quote:
|
On 2012-10-03 10:33, Atomic Tiki Punk wrote:
What kind of torch are you using, the wood is untreated right & you have not applied
any thing to the wood yet?
I use a hand torch, I get them at my local Ace or Home Depot for under $20
and a hard wire brush, like the type used to clean a BBQ grill for removing light coats of ash
you should be able to get the routed areas charred the way you want.
You are doing multiple passes of burning, then a light scrapping to get the right look?
|
|
Paint/Stain first then burn, VERY BAD IDEA! unless you want a flaming mess.
If you want a "Bosko" finish, you apply a burn coat, then scrape the ash with a wire brush
to remove excess ash,then do this as many times as you like to get the look you want.
 
 
|
Lukeulele Tiki Socialite
Joined: Feb 04, 2006 Posts: 378 From: So Cal-holic
| Posted: 2012-10-03 12:15 pm  Permalink
If the pine is still "green," that may be why you are having trouble as well.
 
 
|
Hale Tiki Tiki Socialite
Joined: Oct 19, 2004 Posts: 1799 From: Pittsburgh
| Posted: 2012-10-04 03:54 am  Permalink
Next step is a smaller torch and more burning...
 
 
|
Atomic Tiki Punk Tiki Socialite
Joined: Jul 19, 2009 Posts: 7048 From: Costa Misery
| Posted: 2012-10-04 07:24 am  Permalink
Quote:
|
On 2012-10-03 10:42, Hale Tiki wrote:
Thanks Will, going for burnt though.
ATP: Mapp Gas. Hand torch. Stainless steel brush. Should I be brushing immediately after burning?
|
|
Sorry I forgot to answer your last question, yes you can scrape the wood right after burning, the more times you
repeat this process (Burn & Scrape) the more wood grain becomes prominent for that "Witco" look
since Pine is a lighter wood, you should have a desired look after a few burns.
 
 
|
Hale Tiki Tiki Socialite
Joined: Oct 19, 2004 Posts: 1799 From: Pittsburgh
| Posted: 2012-10-04 07:38 am  Permalink
Quote:
|
On 2012-10-04 07:24, Atomic Tiki Punk wrote:
Quote:
|
On 2012-10-03 10:42, Hale Tiki wrote:
Thanks Will, going for burnt though.
ATP: Mapp Gas. Hand torch. Stainless steel brush. Should I be brushing immediately after burning?
|
|
Sorry I forgot to answer your last question, yes you can scrape the wood right after burning, the more times you
repeat this process (Burn & Scrape) the more wood grain becomes prominent for that "Witco" look
since Pine is a lighter wood, you should have a desired look after a few burns.
|
|
Hot damn! Thanks ATP!
 
 
|
Hale Tiki Tiki Socialite
Joined: Oct 19, 2004 Posts: 1799 From: Pittsburgh
| Posted: 2012-10-11 6:18 pm  Permalink
Well. Here are the results. Thanks for your help. I think I've found my groove.
Here's the first one. I burned too many times, too gently, and didn't carve deep enough:
Here's the second ones, being laid out:
Here's me getting ready to have at it, while wearing my best mustache and Ed Roth Helmet:
Carved:
First burn. Can't be afraid to have at it. And stop if it catches fire. Blow it out. Continue.
After the first burn. Make sure the wood cracks.
Brushed very hard, sideways with the brush, with the grain.
Second burn. After vacuuming. Lost some detail on the thin spots, no biggie.
Final product, brushed gently, vacuumed. Waiting to have a finish applied. I'm not sure if I'm going to spray, or varnish, or what.
Thanks again for your help ATP. More photos to follow.
 
 
|
Atomic Tiki Punk Tiki Socialite
Joined: Jul 19, 2009 Posts: 7048 From: Costa Misery
| Posted: 2012-10-11 6:57 pm  Permalink
Looks like you are getting the hang of it & you are welcome!
Note:if you want to keep more detail don't burn so deep
you may need to repeat the burn & scrape a few more times
it all depends on the finish you are going for & the more you do it the better you will get
so keep rocking, it's looking good.
_________________ Now Punk & Tiki mix well, like a Mai Tai with attitude.
But what do I know? I am just a punk with a Mai Tai.
The Moai see, the Moai like!
 
 
|
pjc5150 Tiki Socialite
Joined: Jun 01, 2009 Posts: 2379 From: Tampa, FL
| Posted: 2012-10-11 7:15 pm  Permalink
I have some matches....
 
 
|
Trailerpark Tiki Tiki Socialite
Joined: Mar 27, 2010 Posts: 352 From: Las Vegas
| Posted: 2012-10-11 8:19 pm  Permalink
Very interesting... I think I'll go burn one.
 
 
|