FEATURES | MUSIC | BOOKS | DRINKS | FORUMS | GAMES | LINKS | ABOUT


advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums Home Tiki Bars My Tiki Bar & Home Theater build
My Tiki Bar & Home Theater build
progrocktv
Tiki Centralite

Joined: Oct 18, 2007
Posts: 11
Posted: 2017-05-16 11:32 am   Permalink

Hi all,
It's been in the planning stages for years, but I'm FINALLY getting around to building my bar! I bought a Mid Century house about 2 years ago with a finished basement. originally I was going to have the bar and a home theater separate from the bar, but decided just to Tiki the whole thing, so this will be a combination of a Tiki Bar and Tiki Home Theater. The Theater will be the last part of the project but the most important emphasis will be to retain the Tiki spirit such as hiding the projector & speakers, framing the projection screen in bamboo, and having the screen "default" in to a mural so it will just look like a giant picture when not in use.
Naturally this will be a multi year project, but figured this would be as good a place as any to document my progress. Naturally, any feedback is most welcome.

Here is the initial space before I start my build. When I was looking at the house, my real estate agent (who is also an MCM fan) discovered that on the other side of this wall (where the laundry room is) were exposed hot and cold water pipes as well as the drain pipe from the sink upstairs, so this would be the PERFECT place for the bar. I'm going to be adding a back bar and make it a wet bar.


Opposite view


And, turning to the right, the theater


I originally was going to build a bar, but found this in an indoor flea market and couldn't pass it up. I'm planning on replacing the Cane Weave with something more like Lauhala Matting to make it more "tikified"




I'll also be adding a thatch awning over the bar which will contain more shelving.

Now here's the kicker, when getting the home inspected, the chimney had 3 flues. There is a fireplace in the living room and I assumed the other 2 were sealed, however the inspector said only one was, another flue went deeper than the living room. We rushed down to the basement to the home theater section, took out his infrared gun and saw there was something behind the wall! Naturally I HAD to see what was behind it and hit the lottery!!!



Stay tuned, I have plans for this thing

Next up, prep the main wall for a mural my girlfriend will be painting and eradicate all of the white walls and ceiling, as well as tearing up the carpet in the bar section (I have plans for the floor

Cheers!



 
View Profile of progrocktv Send a personal message to progrocktv      Edit/Delete This Post Reply with quote
Prikli Pear
Tiki Socialite

Joined: Jan 04, 2017
Posts: 495
From: New Braunfels, Texas
Posted: 2017-05-16 1:23 pm   Permalink

Serendipity can be so much fun! I mean, really, who just throws sheetrock up over a perfectly good fireplace? Congratulations on the great find.

That looks like a fantastic space for tikification. The bar is a sweet find, and I'm currently a few steps ahead of you regarding the back bar/wet bar scenario. I connected the dots with the plumbing behind the wall, and am gearing up to hook up the sink and running water. We'll see if my plumbing skills can match my ambition. Can't wait to see your aesthetic take shape!


 
View Profile of Prikli Pear Send a personal message to Prikli Pear  Email Prikli Pear Goto the website of Prikli Pear     Edit/Delete This Post Reply with quote
MaukaHale
Tiki Socialite

Joined: May 07, 2012
Posts: 794
From: The base of the Volcano
Posted: 2017-05-16 2:58 pm   Permalink

I also have a home theater and tiki bar. I look forward to see how you put it all together. I noticed you have a low sealing, so hanging lights will be a challenge. My recommendation would be to figure out the electrical configuration before you put materials on the walls and ceiling.


_________________

"People are like islands. You have to get close to them to know what they are about."
~ Adam Troy


 
View Profile of MaukaHale Send a personal message to MaukaHale  Email MaukaHale     Edit/Delete This Post Reply with quote
progrocktv
Tiki Centralite

Joined: Oct 18, 2007
Posts: 11
Posted: 2017-05-16 9:34 pm   Permalink

Quote:

On 2017-05-16 14:58, MaukaHale wrote:
I also have a home theater and tiki bar. I look forward to see how you put it all together. I noticed you have a low sealing, so hanging lights will be a challenge. My recommendation would be to figure out the electrical configuration before you put materials on the walls and ceiling.



Ceilings are 8 feet so I have a LITTLE room to play with, but I'll keep most lighting over to the corners. I have a basic plan for electrical but I'm also going to have a grid of hollowed out bamboo for cable runs


 
View Profile of progrocktv Send a personal message to progrocktv      Edit/Delete This Post Reply with quote
progrocktv
Tiki Centralite

Joined: Oct 18, 2007
Posts: 11
Posted: 2017-12-27 11:26 pm   Permalink

Hey guys, I know it's been a while so I wanted to update you on the progress of the bar First order of business was to get rid of all the white walls (Hi Ben!



I wanted to do this for a couple of reasons. First, since it's going to be a home theater as well, the walls are better dark. Second, after installing my bamboo walls any gaps would be black instead of white (which would blend in with the white bamboo too much), so with the black the bamboo would pop a bit more.



I had started ripping up the carpet around May because I wanted to paint the floor My original intention was to rent a floor buffer and remove the glue that was under the carpet since they originally had asbestos tiles which the previous owners removed. To my shock I learned that the mastic adhesive ALSO has asbestos and can only be removed using liquid solvents. So the scraping work began.



During all the scraping and mopping I learned one thing. Once dried mastic adhesive becomes active again, IT NEVER LEAVES! I found this stuff ALL OVER the house for months. After learning the floor would also need to have about 1/4 to 1/2 inches of the concrete grinded down after that to be able to paint without the mastic remains seeping through, I decided to go for wood floors! We have a GREAT reclaimed lumber place here in Colorado so I thought that would be a good plan to sand, stain and seal a floating floor in the basement.



At first I thought $45 a bundle of boards wasn't bad, however it was actually $45-$65 a SQUARE FOOT! Completely unaffordable with all of the work involved, it just wasn't worth it! It was the guy at Home Depot who suggested treated laminate which would give me the same effect at $2 a square foot.



Also another problem was discovered that due to settling, my basement floor was not level around the edges of the walls. This is where I learned about automatic leveler. This stuff is BRILLIANT, just pour and gravity takes over and does the rest.




Next were the cabinets for the back bar. I wanted something "tiki-ish" and not too modern or light. Our local Habitat for Humanity had some of those dark wood cabinets from the 70's which I thouglt would be a nice "clean slate" to add some nice tiki touches to. I also found a lazy Susan for the corner which is PERFECT for extra bottle storage



They also threw in a sink, which will clean up nicely


One thing I have to say, I REALLY lucked out with the basement where I want to put the back bar, is on the opposite side of the wall is the drain from the upstairs sink with an access point I can tap into for the bar sink as well as capped off hot and cold water leads which I just need to remove, add a Shark Bite and route through the wall to the sink.



It will take some drilling through the wall, but nothing TOO complicated (I Hope!)

Next I bought a counter top for the back bar. Since my bar funds are dwindling, I decided to go the inexpensive route and buy them from Home Depot. I found one I was quite happy with and I think will work well with the cabinetry.


One issue was these things were WAY too big, so after a few good tips from You Tube videos I spent an entire day measuring, vicing on guide beams, (praying) and cutting. They turned out pretty good and are a much better fit.



In the mean time I set up a "temporary" Tiki bar on then other side of the room since I had to keep the bar someplace, I thought I might as well make it functional (I certainly won't miss banging my head on the bottom of those stairs on the left though!)



Next up was adding an additional outlet for the refrigerator and additional lights. I had really NEVER done much more than replacing a light bulb or adding a light fixture, but found out it was pretty simple because I could tap into an existing outlet.


Also found some really great light switch and outlet covers (sorry for some reason the pictures keep turning sideways)



I also wanted to add a "glowing shelf" behind the backsplash to keep bottles on. So I mounted some LED tape lights with changing colors, you can select the colors or have them change at random.





Also cut some plexi glass for the bottles to sit on.



Here's the "test", I think he effect turned out REALLY cool



And of course the basement is becoming a real mess!



Next was cutting the counter for the sink.



And finally adding a faucet which I found at Home Depot on clearance for $30




Next up will be cutting a hole in the wall, attaching to the drain and running the hot and cold water leads and I'm HOPING to get the floor in over New Year's weekend. After that it's creating some decorative floor boards, bambooing the walls with lauhala matting and finally the fireplace! It's been a TON of work but I decided to take my time and do it right. It's also been quite a learning experience and thanks to the help at my local Home Depot, I've been doing things I never DREAMED I'd be doing 3 years ago! I'll keep you posted with more updates as I go



[ This Message was edited by: progrocktv 2017-12-28 09:09 ]

[ This Message was edited by: progrocktv 2018-01-02 13:23 ]


 
View Profile of progrocktv Send a personal message to progrocktv      Edit/Delete This Post Reply with quote
HopeChest
Tiki Socialite

Joined: Oct 19, 2015
Posts: 330
From: East Bay, CA
Posted: 2017-12-28 08:37 am   Permalink

This is SO cool, what a great space to convert into your own little haven. Love the glowing shelf for the bottles!

 
View Profile of HopeChest Send a personal message to HopeChest      Edit/Delete This Post Reply with quote
Slacks Ferret
Tiki Socialite

Joined: Oct 02, 2003
Posts: 1329
From: Calgary
Posted: 2017-12-29 09:11 am   Permalink

Fun thread! It's bringing back lots of memories of when I was building my bar. I'm kind of jealous you're still building and figuring things out. I really enjoyed that whole process.


 
View Profile of Slacks Ferret Send a personal message to Slacks Ferret  Email Slacks Ferret     Edit/Delete This Post Reply with quote
Prikli Pear
Tiki Socialite

Joined: Jan 04, 2017
Posts: 495
From: New Braunfels, Texas
Posted: 2017-12-30 8:05 pm   Permalink

Excellent progress, Progrocktv. Dear lord, I can't fathom having to deal with asbestos and that nightmare adhesive. I feel for you! On the other hand, I do agree that laminate is the way to go. I was skeptical of the stuff myself at first, but have since become a major convert. AND, in the "great minds think alike" category, I also had plans for an illuminated bottle shelf, although that's indefinitely on hold (which I'll explain in an update to my own bar build thread in the near future).

I can see your space really taking shape. The wetbar is going to look fantastic! And who can object to a Lazy Susan stacked with rum?


 
View Profile of Prikli Pear Send a personal message to Prikli Pear  Email Prikli Pear Goto the website of Prikli Pear     Edit/Delete This Post Reply with quote
progrocktv
Tiki Centralite

Joined: Oct 18, 2007
Posts: 11
Posted: 2018-01-02 12:21 pm   Permalink

Okay, another (not so long this time between posts) update. As usual I had an annual New Years get together so I also decided to try to make it a deadline and see how much I could get done beforehand with the main goal being the back bar done, the laminate floor laid and the bar placed. The plumbing would not be ready yet (which will be explained below)

First off was cutting a hole in the wall to determine how I could hook up the plumbing to the clearout opening to the kitchen sink pipe which is on the opposite side of the back bar wall. I decided to cut a rectangle hole in the drywall on the bar side from stud to stud (since you won't see it because it will be under the sink, but when I'm finished I might patch it up anyways. I did this to I can eventually secure the pipes for the under sink shutoff valves to the studs which I'll do later on. But I got the "P-Trap" installed and the hole marked.



After cutting the hole, on the opposite side I played around with the pipes to get the right configuration (and thanks to the store's return policy, bought a TON of angled fittings to see what works best)



I also added another clearout opening to the end of the wye connector so I don't have to take everything apart of I ever need to snake it.

Next was to connect the wye connector to the existing clearout valve but encountered a problem. The pipe was set too low when the foundation of the house was poured, so even though it is accessible, there is a concrete slope to access it and won't be able to fit a straight pipe directly in.




All of this can be fixed though, but with LOTS of chipping and chiseling, however I should be able to get enough out to fit the pipe, but not in time for New Years (not really a problem) So now it's on to the flooring!

A few things I learned when installing laminate flooring.
-Never reach into a tool box looking for a carpet blade before looking.
-No room, no matter how well it's constructed is almost NEVER square.
-Those mentioned above carpet blades don't cut a damn thing, even if it feels like it!
-If you are transitioning to a carpet, the groove end fits in nicely between the tack strip and the floor groove.
-Never reach into a tool box looking for a saw blade before looking.
-My girlfriend is the most tolerant human being I have ever known!
-Never reach into a tool box looking for a box cutter before looking.
-All those years of playing with LEGO finally paid off!
-Whoever wrote the instructions on how to install tongue-and-groove laminate flooring have OBVIOUSLY never installed tongue-and-groove laminate flooring, or even have a basic understanding of mechanical physics!

First order of business was figuring out how the floor would transition to the carpeting (which is in the home theater area) The groove part of the flooring was the perfect thing to hold the carpet in place and turned out nicely.



However there was an unevenly cut area due to the fact the carpet cutting tool was barely cutting a thing, and I had to re-align my straight edge after seeing what didn't cut. With all that installation begun which had it's own set of frustrations. The problem is the tongue-and-groove edges are on the length edge, but width edge as well and is set up as a "bend and lock system" so you pace to set it in the groove diagonally and then flatten it in to place. problem is once you have the length in place you can't pop it on to the width because you have to angle it in the side. However a rubber mallet and a flooring block banged everything in place.





The whole process (including measuring and cutting) only took a little over 2 hours to complete, which honestly was pretty fun once I got going. (this is where the LEGO building experience kicked in)



I still have some finishing trimming to do (and cut a couple angle pieces to off set the "un-squareness" of the room but it was done enough for the next night's New Years.



Now the fun part, moving the bar in place and decorating!

After getting the bar moved, the fridge & ice maker hooked up, bottles unpacked and most of the decorations up (which will be changed throughout the final process) I was ready enough and pretty thrilled with the results.















The opposite of the bar looking in to the home theater.



Everyone had a blast on new years (including my head the morning after) and the floor was a hit

Next up is hooking up the final part to the plumbing, bambo-ing the heck out of everything, painting a mural on one of the walls (which my girlfriend has volunteered to do) a bit more lighting and finally the fireplace (boy, do I have plans for that

Happy 2018 everyone!




 
View Profile of progrocktv Send a personal message to progrocktv      Edit/Delete This Post Reply with quote
MaukaHale
Tiki Socialite

Joined: May 07, 2012
Posts: 794
From: The base of the Volcano
Posted: 2018-01-17 8:48 pm   Permalink

Phil,

The bar is coming along and looking good!


 
View Profile of MaukaHale Send a personal message to MaukaHale  Email MaukaHale     Edit/Delete This Post Reply with quote
MaukaHale
Tiki Socialite

Joined: May 07, 2012
Posts: 794
From: The base of the Volcano
Posted: 2018-01-17 8:50 pm   Permalink




[ This Message was edited by: MaukaHale 2018-01-17 20:51 ]


 
View Profile of MaukaHale Send a personal message to MaukaHale  Email MaukaHale     Edit/Delete This Post Reply with quote
progrocktv
Tiki Centralite

Joined: Oct 18, 2007
Posts: 11
Posted: 2018-01-17 9:28 pm   Permalink

Quote:

On 2018-01-17 20:48, MaukaHale wrote:
Phil,

The bar is coming along and looking good!




Thank you sir! I still need to check out your place for further inspiration


 
View Profile of progrocktv Send a personal message to progrocktv      Edit/Delete This Post Reply with quote
U-Moderate:
  
v1.5

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2018 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation