FEATURES | MUSIC | BOOKS | DRINKS | FORUMS | GAMES | LINKS | ABOUT


advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums » » Home Tiki Bars » » Simple Mug Shelves
Simple Mug Shelves
coldwarspacemonkey
Tiki Centralite

Joined: Aug 08, 2017
Posts: 57
From: Shipwrecked on the First Coast
Posted: 29 days ago; 10:50 am   Permalink

I needed some free-standing shelves for my fledgling tiki and mug collection. I did a search and came up with some amazing stuff here on TC, but nothing for something as basic as what I needed. Absent a good how-to, I decided to keep it simple and make it up as I went along. While using the “learn by doing” school of trial and error, I took a few pictures in case some other furniture-challenged TC’er might find them of use.
Comments and pointers appreciated!

*****

First thing I remembered from my long-ago junior high shop class (and from my Dad, the NASA engineer) is that you need a plan. I sketched up this one (minor changes were made during construction, like lowering the bottom shelf an inch):


Then it was off to my choice of the orange store or the blue store for some lumber. The orange store was closer. I decided on 1” x 6” (actually ¾” x 5 ½”) “select” pine stock.


Used a circular saw to knock them down. One side and two shelves from each of 4 boards, with the two top shelves from the last board.


Next stop was the router table to cut the ends of the side pieces and the top shelves for the double rabbet joints on the top corners. This is where I started wishing I’d spent the money for a rabbeting bit for the router. I cut them in two passes.


Then it was time for the dadoes. I used a homemade fence, and clamped matching side pieces together, routing them at the same time. After the first cut I used a scrap piece of 1” x 6” inserted across both sides into the first cut to index the sides, ensuring the remaining cuts matched and would result in level shelves.



Then it was time for the fun part. I wanted a simple design on the sides, even though in their planned location it wouldn’t be visible (maybe later when I get a full on lounge put together…). My router skills are still evolving (they’re in the amoeba stage at the moment) so I decided on straight cuts with no freehand work. Speed square simplified drawing the pattern (don’t tell Mrs. Monkey I laid out the pattern on the kitchen table.)


Then it was time to get make some more fences and get to work with the router.


Here’s the error part of “trial and error”.
I was using a block of wood marked with the distance between the fence and the center of the cut to make positioning the fence easier. Well, it works better if you use the correct side of the gauge block. There’s the line where the cut should have been, and then there’s the cut. This happened early on and was correctable by routing the opposing side piece with the same error. The pattern was forgiving, and this particular goof is not noticeable on the finished piece. Moral: measure twice, cut once. Seems I’ve heard that one before.


The next foul-up was from not getting the fence and the workpiece adequately clamped together, and the wood beginning to wander. Not fixable, but hey, this is supposed to look handmade, right?


Router work done.


And assembled.


Next was Minwax Special Walnut stain.


Three coats of satin poly later and here they are in their assigned location.



I secured them to the wall to prevent tipping (6” is pretty narrow, especially on carpet) using some leftover hardware from a “buy it in a box” piece of furniture.

Other than correcting the errors I mentioned, the only change I would make on a future project like this is to use a spit coat on the pine before staining. I’ve done that before and it evens out the stain a lot better, but I got in a hurry on this one.

Thanks to all the folks on TC who have shared both their knowledge and their inspiration. Mahalo!



 
View Profile of coldwarspacemonkey Send a personal message to coldwarspacemonkey  Email coldwarspacemonkey     Edit/Delete This Post Reply with quote
Pele Paul
Tiki Socialite

Joined: Aug 26, 2008
Posts: 721
From: San Dimas, ca
Posted: 29 days ago; 12:41 pm   Permalink

awesome!!! nice work

 
View Profile of Pele Paul Send a personal message to Pele Paul  Email Pele Paul     Edit/Delete This Post Reply with quote
Bam Bam
Tiki Socialite

Joined: May 13, 2016
Posts: 239
From: NEPA
Posted: 28 days ago; 6:11 pm   Permalink

Awesome work! Certainly puts my bookshelf brackets to shame.

 
View Profile of Bam Bam Send a personal message to Bam Bam      Edit/Delete This Post Reply with quote
Sandbartender
Tiki Centralite

Joined: Oct 02, 2018
Posts: 26
From: The North Coast
Posted: 28 days ago; 6:52 pm   Permalink

That looks great! Nice collection of mugs, BTW.


 
View Profile of Sandbartender Send a personal message to Sandbartender      Edit/Delete This Post Reply with quote
Prikli Pear
Tiki Socialite

Joined: Jan 04, 2017
Posts: 606
From: New Braunfels, Texas
Posted: 27 days ago; 08:28 am   Permalink

Good job! The only downside is that your nice router work is obscured!


 
View Profile of Prikli Pear Send a personal message to Prikli Pear  Email Prikli Pear Goto the website of Prikli Pear     Edit/Delete This Post Reply with quote
coldwarspacemonkey
Tiki Centralite

Joined: Aug 08, 2017
Posts: 57
From: Shipwrecked on the First Coast
Posted: 27 days ago; 12:50 pm   Permalink

Pele Paul - Thanks!
Bam Bam - Anyone that carves black locust has my complete respect - I've cut my share of that stuff. Thank you for the kind words!
Sandbartender - I appreciate it! The mug collection is rather sparse, but growing slowly.
Prikli Pear - Thanks! I knew they'd be hidden for now, but at some future date I hope to have a little better place for them.


 
View Profile of coldwarspacemonkey Send a personal message to coldwarspacemonkey  Email coldwarspacemonkey     Edit/Delete This Post Reply with quote
W8N2Surf
Tiki Centralite

Joined: Jul 03, 2015
Posts: 92
From: Virginia
Posted: 24 days ago; 07:19 am   Permalink

I like the lumber thickness, great woodworking for a solid clean result.

 
View Profile of W8N2Surf Send a personal message to W8N2Surf  Email W8N2Surf     Edit/Delete This Post Reply with quote
U-Moderate:
  
v1.5

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2018 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation