advertise on Tiki Central

Celebrating classic and modern Polynesian Pop
  [Edit Profile]  [Edit Preferences]  [Search] [Sign Up]
[Personal Messages]  [Member List]  [Help/FAQ]  [Rules]  [Login]
Tiki Central Forums Creating Tiki Tiki Carving Question for carvers...

You are viewing a single post from the search result.
view the entire topic
Goto page ( 1 | 2 Next Page )
Question for carvers...
Tiki Centralite

Joined: May 26, 2004
Posts: 35
From: Yellow Springs, Ohio
Posted: 2004-06-14 09:28 am   Permalink


On 2004-06-14 09:15, freddiefreelance wrote:
Have you carved any Tiki Ice Sculpures? That would be something I'd like to see pictures of.

What tools do you use for Ice Sculpures? I'd assume a chainsaw for roughing out large pieces then chisels, gouges & an ice pick for the finer details. These're the same tools used by most of the carvers on this board (less the ice pick, though). You'd just have to add sanding, burning, & staining/varnishing to your skills, and I'd think they're the least important of the needed skills. I think being able to choose a good design, lay it out, rough it out & add details are much more important.

Never carved any tiki ice, although, I would love to try it. I've carved mostly animals and grecian pillars, birdbaths, etc.

The tools I use are probably not the best.
I use a large macheti type knife for the rough work, smaller knives and a dremel for detail.

View Profile of ChefMike Send a personal message to ChefMike      Edit/Delete This Post Reply with quote
Goto page ( 1 | 2 Next Page )

[ About Tiki Central | Contact Tiki Central | Advertise on Tiki Central ]
(c) 2000-2018 Tikiroom.com (tm), Tiki Central (tm)

Credits & copyright infomation